metal wire wrapping testing machine
1.Introduction
Metal wire winding tester is suitable for testing the ability of metal wire to withstand plastic deformation in torsion and to display defects on the surface and inside of wire.
2.Main technical parameters
1. gripping range: 0.1mm-5mm
2. two plus head distance: less than 300mm
3. the outer diameter of the jaws: 74mm
4. jaws holding range: 0-5.0mm
5. twisting speed: 30, 60, 90; 120; 180; 300r/min
6. speed error: < ±10%
Minimum reading value of 7. cycles: 0.1
8. two chuck coaxiality (mm): < 0.4
9. guideway parallelism (mm): < 0.2
10. size (long * width * high): 980 * 400 *600mm
11. weight: about 120KG
12. power supply: AC 220V 50Hz
Return list